Product ID:POLYLITE 90-651
MSDS Date:01/01/1985
FSC:9330
NIIN:00N006105
MSDS Number: BCLYQ

REICHHOLD CHEMICALS,INC

Emergency Phone: 914-682-5700

Cage: DO591

REICHOLD CHEMICAL INC

13582 WHITE PLAINS, NY 10603-3216 US

Telephone: 800-275-6353

Cage: 3A684

TRICHLOROFLUOROMETHANE (CFC-11) (SARA III)

CAS: 75-69-4

RTECS: PB6125000

Fraction By Weight: >30%

OSHA PEL 1000 PPM

ACGIH TLV: C, 1000 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

AMINES (TYPE NOT SPECIFIED)

Fraction By Weight: <1%

Effects of Overexposure:EYE/SKIN: IRRITATION. VAPORS: REDUCES OXYGEN
SUPPLY BELOW LEVEL TO SUPPORT LIFE.

First Aid:EYE: FLUSH WITH WATER 15 MINUTES,CONSULT PHYSICIAN. SKIN:
WASH WITH SOAP AND WATER. INGESTION: INDUCE VOMITING & CALL
PHYSICIAN. INHALATION: REMOVE TO FRESH AIR,GIVE ARTIFICIAL
RESPIRATION IF NEEDED,C ONSULT PHYSICIAN.

Flash Point:160F/71C (PMCC)
Extinguishing Media:WATER,CHEMICALS,CO*2
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS
Unusual Fire/Explosion Hazard:POSSIBLE TRICHLOROMONOFLUOROMETHANE
BREAKDOWN TO TOXIC GAS AT EXTREMELY HIGH FIRE TEMPERATURE

Spill Release Procedures:AVOID BREATHING FUMES - USE ADEQUATE FRESH AIR
SUPPLY. SPREAD ABSORBENT MATERIAL AND SHOVEL INTO SEALED
CONTAINERS.

Handling and Storage Precautions:STORE AT 75F/23C (60-70F/15-21C
PREFERRED). RELIEVE PRESSURE SLOWLY WHEN OPENING CONTAINER.
Other Precautions:RESEAL CONTAINER WELL. NO SMOKING,FLAME CUT,BRAZING
OR WELDING IN AREA OF USE

Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN.
Ventilation:LOCAL AND DOWN DRAFT,FLOOR LEVEL EXHAUST.
Protective Gloves:CHEM RESISTANT
Eye Protection:CHEM SAFETY GOGGLES
Other Protective Equipment:AS NEEDED TO PREVENT SKIN CONTACT.
Supplemental Safety and Health

Boiling Pt:B.P. Text:77F/25C
Vapor Density:5.67
Spec Gravity:1.168
Evaporation Rate & Reference:>1 (BUTYL ETHER)
Solubility in Water:MODERATE
Appearance and Odor:AMBER LIQUID - NEGLIGIBLE ODOR;SLIGHTLY AROMATIC

Stability Indicator/Materials to Avoid:NO
Stability Condition to Avoid:HIGH TEMPERATURE
Hazardous Decomposition Products:THERMAL BREAKDOWN OF FLUOROCARBON TO
TOXIC GAS
Conditions to Avoid Polymerization:ISOCYANATES.

Waste Disposal Methods:COMPLY WITH LOCAL,STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.